RAILWAYS
Powercon provide fail-safe products and systems for railway signalling. All portfolio is made by set of electronic relays for 50Hz and 75Hz wayside signalling. Track circuit relay, code generator, code amplifier, safe joint relay and mono-phase 75Hz UPS are all in operation for more than 6 years along Metro Milano lines.
Jointless rails need different technology to control the presence of the train along it. Powercon provide a fail-safe solution of audio frequency track circuit to control short track length up to 2.000 meter.
Powercon’s Automatic Train Stop system increases safety of train’s service by means a complete solution composed on digital control rack, electromagnetic antennas and driver cockpit.
LED signals with different configuration are also available.
TRACK CIRCUIT LOW FREQUENCY 50Hz/75Hz
RCF – PHASE SHIFT RELAY
Fail-safe digital track circuit relay is suitable for joint rail track. RCF can work at both frequencies 50Hz and/or 75Hz as well. This phase shift relay replaces the electromechanical version increasing reliability and efficiency of wayside signalling. Electronic cards are housed into a standard box according with Italian State Railways terminals. Other mechanical solutions can be designed accordingly.
TRACK CIRCUIT LOW FREQUENCY 50Hz÷75Hz
CODE GENERATOR 75; 120; 180 AND 270 – CTS
Fail-safe digital standard code generator relay for train speed control and protection. The relay generates correct pulse per minutes with the information of braking curve of the train. Code generator is a fully digital solution with same terminal and dimension of the electromechanical one.
TRACK CIRCUIT LOW FREQUENCY 50Hz÷75Hz
CODE AMPLIFIER 75; 120; 180 AND 270 – CPR
Code amplifier is coupled with code generator digital or electromechanical as well. The amplifier can generate PWM signal to rail from 0Hz up to 440Hz with enagh power to send along the track.
TRACK CIRCUIT LOW FREQUENCY 50Hz÷75Hz
RAIL JOINT CONTROL RELAY – CJU
Full digital rail joint control relay is based on Italian State version 819/519. All protection functions are implemented on digital card to get higher reliability and availability. The relay and complete panel is in operation along Metro Milano Line 2 since 2011.
TRACK CIRCUIT LOW FREQUENCY 50Hz÷75Hz
AC/AC CONVERTER IN 50Hz OUT 75Hz÷83,3Hz – 10 kW.
10kW AC/AC converter suitable to supply track circuit along wayside at 75Hz. Converter with vectorial controller on digital electronic cards. The converter has input supply at 50Hz three phase and 75÷83,3Hz as output. Single module can be connected in parallel to get a redundant solution, hot swappable.
TRACK CIRCUIT AUDIO FREQUENCY
AUDIO FREQUENCY TC RECEIVER MODULE A_RCF
Audible frequency track circuit is designed for train operation along joint less rails.
The audio track circuit is designed on FSK modulation at low frequency, high level of immunity to traction current. A pair of receiver and transmitter has same frequency along same track to check the presence of the train. Adjacent tracks work at shifted frequencies separate by electrical joint. High disturbance immunity, it can work with the presence of low frequency TC.
Fail-safe system on fully digital card, it is a SIL 4 solution for train protection system.
TRACK CIRCUIT AUDIO FREQUENCY
AUDIO FREQUENCY TC TRANSMITTER MODULE – A_CTS –
Audible frequency track circuit is designed for train operation along joint less rails.
The audio track circuit is designed on FSK modulation at low frequency, high level of immunity to traction current. The transmitter can cover short distance (under 80meters), mid distance (up to 300 meters) and long distance (up to 2.000 meters). Fail-safe system on fully digital card, it is a SIL 4 solution for train protection system. To increase the availability of the system two transmitter can be connected in parallel on same track.
TRACK CIRCUIT AUDIO FREQUENCY
AUDIO FREQUENCY TRACK CIRCUIT FILTER MODULE – A_FIL
Audible frequency track circuit is designed for train operation along joint less rails.
The filter modules are the interface between control room and trucks, his position is crucial to realize the electrical joint with adjacent trucks. Every pair of TX-RX module has couple of filter module. IP67 box are suitable to be installed along the rails. EN60601 test passed, cat 3T and 4V of IS 402 standard.
TRACK CIRCUIT AUDIO FREQUENCY
AUDIO FREQUENCY TC LINE ADAPTER MODULE – A_LA
Audible frequency track circuit is designed for train operation along jointless rails.
Line adapter is needed when the distance between the TX and rail is longer than 500 meters. Longer distances may be achieved by suitable Line Adapter.
AUTOMATIC TRAIN STOP SYSTEM
ON BOARD BRAKING CONTROLLER INDUSI – MCB-1 –
ATP system is an intermittent train protection fail-safe solution to protect station signals, level crossing signals and wrong line operation.
On board controller, EN50155 certified, is made by electronic cards on 2oo2 logic which controls independent electromagnetic antennas. Principal of operation is on INDUSI system
Powercon provide complete system: rack controller, electromagnetic antenna (on board and ground) and driver operation pulpit. We certify the coupling among antennas and the current signal in the on board controller.
AUTOMATIC TRAIN STOP SYSTEM
ATP ON BOARD ANTENNA INDUSI
On board antenna generate the HF signal to ground and read the status of the signal by means of ground antenna. The on board antenna passed all mechanical and thermal test of the EN50155 to be installed on the boogie of the train EN50155 tests. Standard frequencies for all two channels are 30kHz and 50kHz but other frequency can be implemented. We certify the coupling among antennas and the current signal in the on board controller.
AUTOMATIC TRAIN STOP SYSTEM
ATP GROUND ANTENNA INDUSI
Ground antenna is purely passive electromagnetic component designed to be installed near the rail. The ground antenna passed the test of EN60601 and IS402 for installation on the platform or on ballast. We certify the coupling among antennas and the current signal in the on board controller.
AUTOMATIC TRAIN STOP SYSTEM
ZUB122 TESTER
ZUB 122 is instrument to test electromagnetic ground antennas of INDUSI train stop system. The ZUB 122 allows to check the coupling of the ground antenna with the on board equipment of ATP by means of the correct spacing between the two antennas. The instrument reports on a 5” screen the level of both signals of the control circuits and simulates the intervention of each of the two circuits and stores the current values. Easy to handle thanks to a lithium battery, an indispensable tool for the correct certification of the ATP system efficiency. The instrument can provide a complete record of each antenna.
LED SIGNAL
POWERLUX
POWERLUX is full electronic LED signal. Powercon select only high quality electronic components to provide a high reliable solution for Railway Authorities. According with other signalling products, POWERLUX is a fail-safe equipment suitable for all Metros and Railways operation. The signals can be 2 or 3 light or indication. It can be Yellow, Green, Red, White.
POWERBOND – IMPEDENCE BOND Impedance bond for railway and metro application to be made in aluminium or copper wound designed and tested according with International standards. The impedance bond can be equipped with 50Hz or 75Hz filter to block track circuit signals.
TRACK CIRCUIT LOW FREQUENCY 50Hz÷75Hz
RCF – PHASE SHIFT RELAY
Fail-safe digital track circuit relay is suitable for joint rail track. RCF can work at both frequencies 50Hz and/or 75Hz as well. This phase shift relay replaces the electromechanical version increasing reliability and efficiency of wayside signalling. Electronic cards are housed into a standard box according with Italian State Railways terminals. Other mechanical solutions can be designed accordingly.
TRACK CIRCUIT LOW FREQUENCY 50Hz÷75Hz
CODE GENERATOR 75; 120; 180 AND 270 – CTS
Fail-safe digital standard code generator relay for train speed control and protection. The relay generates correct pulse per minutes with the information of braking curve of the train.
TRACK CIRCUIT LOW FREQUENCY 50Hz÷75Hz
CODE AMPLIFIER 75; 120; 180 AND 270 – CPR -.
Code amplifier is coupled with code generator digital or electromechanical as well. The amplifier can generate PWM signal to rail from 0Hz up to 440Hz with enagh power to send along the track.
TRACK CIRCUIT LOW FREQUENCY 50Hz÷75Hz
RAIL JOINT CONTROL RELAY – CJU
Full digital rail joint control relay is based on Italian State version 819/519. All protection functions are implemented on digital card to get higher reliability and availability. The relay and complete panel is in operation along Metro Milano Line 2 since 2011.
TRACK CIRCUIT LOW FREQUENCY 50Hz÷75Hz
AC/AC CONVERTER IN 50Hz OUT 75Hz÷83,3Hz – 10 kW.
0kW AC/AC converter suitable to supply track circuit along wayside at 75Hz. Converter with vectorial controller on digital electronic cards. The converter has input supply at 50Hz three phase and 75÷83,3Hz as output. Single module can be connected in parallel to get a redundant solution, hot swappable.
TRACK CIRCUIT AUDIO FREQUENCY
AUDIO FREQUENCY TC RECEIVER MODULE A_RCF
Audible frequency track circuit is designed for train operation along joint less rails.
The audio track circuit is designed on FSK modulation at low frequency, high level of immunity to traction current. A pair of receiver and transmitter has same frequency along same track to check the presence of the train. Adjacent tracks work at shifted frequencies separate by electrical joint. High disturbance immunity, it can work with the presence of low frequency TC.
Fail-safe system on fully digital card, it is a SIL 4 solution for train protection system.
TRACK CIRCUIT AUDIO FREQUENCY
AUDIO FREQUENCY TC TRANSMITTER MODULE – A_CTS
Audible frequency track circuit is designed for train operation along joint less rails.The audio track circuit is designed on FSK modulation at low frequency, high level of immunity to traction current. The transmitter can cover short distance (under 80meters), mid distance (up to 300 meters) and long distance (up to 2.000 meters). Fail-safe system on fully digital card, it is a SIL 4 solution for train protection system. To increase the availability of the system two transmitter can be connected in parallel on same track.
TRACK CIRCUIT AUDIO FREQUENCY
AUDIO FREQUENCY TRACK CIRCUIT FILTER MODULE – A_FIL
Audible frequency track circuit is designed for train operation along joint less rails. The filter modules are the interface between control room and trucks, his position is crucial to realize the electrical joint with adjacent trucks. Every pair of TX-RX module has couple of filter module. IP67 box are suitable to be installed along the rails. EN60601 test passed, cat 3T and 4V of IS 402 standard.
TRACK CIRCUIT AUDIO FREQUENCY
AUDIO FREQUENCY TC LINE ADAPTER MODULE – A-LA
Audible frequency track circuit is designed for train operation along jointless rails.
Line adapter is needed when the distance between the TX and rail is longer than 500 meters. Longer distances may be achieved by suitable Line Adapter.
AUTOMATIC TRAIN STOP SYSTEM
ON BOARD BRAKING CONTROLLER INDUSI – MCB-1 –
Automatic Train Stop system is an intermittent train protection fail-safe solution to protect station signals, level crossing signals and wrong line operation.
On board controller, EN50155 certified, is made by electronic cards on 2oo2 logic which controls independent electromagnetic antennas. Principal of operation is on INDUSI system
Powercon provide complete system: rack controller, electromagnetic antenna (on board and ground) and driver operation pulpit. We certify the coupling among antennas and the current signal in the on board controller.
AUTOMATIC TRAIN STOP SYSTEM
ATP ON BOARD ANTENNA INDUSI
On board antenna generate the HF signal to ground and read the status of the signal by means of ground antenna. The on board antenna passed all mechanical and thermal test of the EN50155 to be installed on the boogie of the train EN50155 tests. Standard frequencies for all two channels are 30kHz and 50kHz but other frequency can be implemented. We certify the coupling among antennas and the current signal in the on board controller.
AUTOMATIC TRAIN STOP SYSTEM
ATP GROUND ANTENNA INDUSI
Ground antenna is purely passive electromagnetic component designed to be installed near the rail.
The ground antenna passed the test of EN60601 and IS402 for installation on the platform or on ballast. We certify the coupling among antennas and the current signal in the on board controller.
AUTOMATIC TRAIN STOP SYSTEM
ZUB122 TESTER
ZUB 122 is instrument to test electromagnetic ground antennas of INDUSI train stop system. The ZUB 122 allows to check the coupling of the ground antenna with the on board equipment of ATP by means of the correct spacing between the two antennas. The instrument reports on a 5” screen the level of both signals of the control circuits and simulates the intervention of each of the two circuits and stores the current values. Easy to handle thanks to a lithium battery, an indispensable tool for the correct certification of the ATP system efficiency. The instrument can provide a complete record of each antenna.
LED SIGNAL
POWERLUX
POWERLUX is full electronic LED signal. Powercon select only high quality electronic components to provide a high reliable solution for Railway Authorities. According with other signalling products, POWERLUX is a fail-safe equipment suitable for all Metros and Railways operation. The signals can be 2 or 3 light or indication. It can be Yellow, Green, Red, White.
POWERBOND
IMPEDANCE BOND
Impedance bond for railway and metro application to be made in aluminium or copper wound designed and tested according with International standards. The impedance bond can be equipped with 50Hz or 75Hz filter to block track circuit signals.